How To Update Samsung Galaxy Tab P1000 to XWJMK Froyo 2.2 Firmware

• First up you will have to download the XWJMK 2.2 firmware from here after which you will have to open the Odin’s exe file after which you will see that a pop up screen will be launched which will look like the below shown screen shot.

• Now, after opening the Odin, in the Option list as shown below, you will have to check all the options in the Option field which are “Re Partition”, “Auto Reboot” and also the “F:Reset Time”. Now, as soon as you update all the option fields with the check marks as shown in the red circle below, you will have to next choose the PIT file.

• After choosing the PIT file, you will have to put your phone in the download mode which can be done by pressing the download mode and then by holding the volume down button you will have to switch ON the device as shown in the below pictured manner.

• So, after entering in the download mode successfully you will have to connect your device to the computer with the data cable and need to make sure that the ID:COM box glows yellow which means that all the device drivers are loaded successfully and you are ready to proceed for the rest of the steps ahead.
• Now, there you go you can now hit on the Start button after which you will have to wait for a while till the Green colored “PASS” box is not shown up which is shown below. It may take 3-5 minutes to show up this box.

• Now, next up you will have to click on the Reset button and then you need to just simply un check the “Re Partition” box and then you will have to select the PDA, Phone and CSC files which are in the downloaded zip file of the firmware n the respective options as shown in the below screen shot.

• After this remove the battery and then enter into the download mode as by the above mentioned method by putting the battery again into the device after which selecting all the options like PDA, Phone and CSC you need to click on the start button as shown below after seeing the Green colored PASS button.

So, that’s it you have now successfully upgraded to the new latest firmware of XWJMK Froyo 2.2 version for your Galaxy Tab. Now to simply find via the code whether you have upgraded the firmware or not successfully, all you need to do is to just simply enter in the code as *#1234# after which you will be able to see the device’s version number along with the firmware version in detail easily. Do, let us know if you face or any issues while updating the firmware of your Samsung Galaxy Tab.

Password – samfirmware.com


-Arabic firmware here