Redsn0w 0.9.10b3

@pod2g has created a terrific gift for iOS fans — an untethered 5.0.1 jailbreak for non-A5 devices! 

Many of you have already been following @pod2g’s blog where he’s been keeping everyone up to date on his progress.  And so you know that he recently decided to push the button on a release for all devices except the new iPhone4S and iPad2.  @pod2g’s untether involves two separate exploits and a few other “tricks” — and since he’s taken the @comex approach of doing nearly everything himself, you know his plate has been full these past few months!

A few days ago, @pod2g gave the untether to both the iPhone devteam and the chronic devteam.  We’ve put it into redsn0w 0.9.10 and PwnageTool, and the chronic devteam put it into a Cydia package (the same set of exploits is in all three).

Here are the basic steps for how to get it:

The untether is for iOS 5.0.1 on iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G
If you have one of those devices and are not on 5.0.1 yet, update now!  The SHSH window is still open for 5.0.1  If you unlock via ultrasn0w or gevey, make sure you only get to 5.0.1 via a custom IPSW!  See the guides at places like iClarified.com if you don’t know how.  Once you’re at 5.0.1, use the latest redsn0w 0.9.10 to both jailbreak and untether.
If you’re already at 5.0.1 with a tethered jailbreak, you have two choices: either run redsn0w 0.9.10 over your current jailbreak (deselect “Install Cydia” if you do that), or install the Cydia package prepared by the chronic devteam.  The patches are the same regardless of which you choose.
Some of you are using a hybrid 5.0/5.0.1 configuration.  If so, do not attempt to install this untether over that setup!  You will most likely get into a reboot cycle.  Do a sync and fresh restore to 5.0.1 then install the jailbreak + untether.
As mentioned earlier, @pod2g has spent months working on all the exploits and tricks in this untether, and many of you may be wondering how you can send donations.  Although the iPhone devteam itself doesn’t take donations, we thought it was appropriate to provide a link at the end of the redsn0w run for you to more easily donate directly to @pod2g if you wish (alternatively, you can go right here).  There’s a link in the Cydia package for donating to the chronic devteam for the Cydia version of @pod2g’s untether.

@pod2g is now looking for a way to extend this to A5 devices.  Because those devices cannot use geohot’s limera1n exploit to inject the untether, they require exploits above and beyond those used for this release.  Keep following pod2g on twitter or his blog for any progress reports!

Update #2: The b2 version of redsn0w includes the launchctl-related fix by @planetbeing as mentioned by @saurik here and here.  As usual, you can just re-run redsn0w in jailbreak mode over your existing 5.0.1 jailbreak (even a PwnageTool one), making sure to de-select “Install Cydia” if you do.  Always be sure to do a controlled “slide to power off” shutdown of your device before running redsn0w.
Update #3: The b3 version of redsn0w fixes a problem where re-running redsn0w over an existing jailbreak would cause MobileSubstrate-based apps to stop running until MS was installed again.  Now you can re-run the redsn0w jailbreak step without worrying about that (but still remember to de-select the “Install Cydia” option if it’s already installed).
TIP: If auto-detection fails and redsn0w tells you no identifying data was found, you can always pre-select the appropriate 5.0.1 IPSW using “Extras->Select IPSW”.
Here are the redsn0w download links:
redsn0w 0.9.10b3 for OS X
redsn0w 0.9.10b3 for Windows (be sure to run in Administrator mode)

Iphone-dev Team Releases Redsn0w0.9.10b1 5.0.1 untethered Supported(A4 chip ONLY)

Untethered holidays
@pod2g has created a terrific gift for iOS fans — an untethered 5.0.1 jailbreak for non-A5 devices!

Many of you have already been following @pod2g’s blog where he’s been keeping everyone up to date on his progress. And so you know that he recently decided to push the button on a release for all devices except the new iPhone4S and iPad2. @pod2g’s untether involves two separate exploits and a few other “tricks” — and since he’s taken the @comex approach of doing nearly everything himself, you know his plate has been full these past few months!


A few days ago, @pod2g gave the untether to both the iPhone devteam and the chronic devteam. We’ve put it into redsn0w 0.9.10 and PwnageTool, and the chronic devteam put it into a Cydia package (the same set of exploits is in all three).
Here are the basic steps for how to get it:

• The untether is for iOS 5.0.1 on iPhone3GS, iPhone4, iPhone4-CDMA, iPad1, iPod touch 3G, iPod touch 4G
• If you have one of those devices and are not on 5.0.1 yet, update now! The SHSH window is still open for 5.0.1 If you unlock via ultrasn0w or gevey, make sure you only get to 5.0.1 via a custom IPSW! See the guides at places like iClarified.com if you don’t know how. Once you’re at 5.0.1, use the latest redsn0w 0.9.10 to both jailbreak and untether.
• If you’re already at 5.0.1 with a tethered jailbreak, you have two choices: either run redsn0w 0.9.10 over your current jailbreak (deselect “Install Cydia” if you do that), or install the Cydia package prepared by the chronic devteam. The patches are the same regardless of which you choose.
• Some of you are using a hybrid 5.0/5.0.1 configuration. If so, do not attempt to install this untether over that setup! You will most likely get into a reboot cycle. Do a sync and fresh restore to 5.0.1 then install the jailbreak + untether.

As mentioned earlier, @pod2g has spent months working on all the exploits and tricks in this untether, and many of you may be wondering how you can send donations. Although the iPhone devteam itself doesn’t take donations, we thought it was appropriate to provide a link at the end of the redsn0w run for you to more easily donate directly to @pod2g if you wish (alternatively, you can go right here). There’s a link in the Cydia package for donating to the chronic devteam for the Cydia version of @pod2g’s untether.


@pod2g is now looking for a way to extend this to A5 devices. Because those devices cannot use geohot’s limera1n exploit to inject the untether, they require exploits above and beyond those used for this release. Keep following pod2g on twitter or his blog for any progress reports!
Here are the redsn0w download links:

• redsn0w 0.9.10b1 for OS X
• redsn0w 0.9.10b1 for Windows (be sure to run in Administrator mode)

Alternative Link's Hosted on Mediafire

redsn0w_win_0.9.10b1.zip
redsn0w_mac_0.9.10b1.zip

How To Jailbreak iOS 5.0.1 Untethered

As reported few minutes ago, the much-waited untethered jailbreak for iOS 5.0.1 has been released based on pod2g’s discovered exploit. Since the links for Redsn0w and GreenPois0n jailbreak tools are not ready yet, there’s an alternate method to do the untethered jailbreak. You can currently use a new jailbreak tool available in Cydia named “Corona” to jailbreak iOS 5.0.1 untethered. Below we’ll show you how.

P0sixninja, the brain member of the Chronic Dev Team, developed a Cydia tweak called “Corona” and uploaded it Cydia for users who already have a tethered jailbreak on iOS 5 or iOS 5.0.1.
You’ll need to do a tethered jailbreak first using previous redsn0w version. You can follow our guide posted here to do a tethered jailbreak on your A4 device running iOS 5.0.1 or iOS 5.

How To Jailbreak iOS 5.0.1 Untethered

STEP 1: Assuming your device is already jailbroken, head to Cydia and leave it till the update is finished.
STEP 2: Once updated, search for “Corona 5.0.1 Untether” under BigBoss repository and you’ll be able to download it for free by hitting the “Install” button on the top right of screen.

[NEW SuperOneClick] Root, Install & Use xRecovery on Xperia X8

Just wanted to share how it is done.

DISCLAIMER: Please use the info below at your own risk with no warranty of any kind.

A) INSTALLING xRecovery

WHAT YOU NEED: <download>
SuperOneClick,xRecovery 0.1,astro filemanager,root explorer

Note: There are 3 versions of xRecovery (xRecovery v0.1 for Xperia X8, xRecovery v0.2 and xRecovery v0.3 for Xperia X10) but only xRecovery v0.1 will work on the Xperia X8. These xRecovery files are developed specific to a type of android phone not upgrades/updates.



HOW IT IS DONE:

Step 1: Root your Xperia X8
- download and unzip SuperOneClickv1.9.1-ShortFuse to PC Desktop
- connect Xperia X8 to PC (Do not mount)
- on your phone <goto><setting><applications> select <unknown sources>
- on your phone <goto><settings><applications><development> select <usb debugging>
- Launch SuperOneClick -> click <Root>
- you will see - <not successful - is your phone software higher than 2.0?>
- click <yes> and then <success> & <test su> message
- Reboot Xperia X8

NOTE:
If SuperOneClick is running but hangs mid-process you need to install .NET Framework v2.0 or above. DO NOT ASSUME you are running Windows 7 it has .NET Framework installed.

If you are successful in ROOTING your phone - SuperUser app will be installed to your Xperia X8.
If you are not successful:-
(a) check your PC <devices><usb> to see if your phone is recognized by your PC (troubleshoot PC driver problem)
(b) <usb debugging> in your Xperia X8 phone settings enabled?
Then <Launch> <SuperOneClick> and try again.

[if you don't have a file manager on your phone]
Install <Astro File Manager> from Android Market


Step 2: Mount Xperia X8 (to access SD Card)
- copy <Root.Explorer.v2.16.apk> to root of SD Card
- using PC create folder <xRecovery> and unzip xRecovery0.1.rar
- put the 3 files into the xRecovery folder you've created
- copy the xRecovery folder to root of SD Card

Step 3: UnMount Xperia X8 from PC

Step 4: Launch <Astro> Install <Root Explorer v2.16.apk>

Step 5: Copy xRecovery files to </system/bin> of your phone
- Launch <Root Explorer>
- scroll down to /sdcard <click to access>
- scroll down to xRecovery folder <click to access>
- Select each of the 3 files (one by one) <click & hold><copy>
- <click> parent folder (twice)
- scroll down to <click to access><system>
- <click to access><bin> and <click><Mount R/W>
- press <paste> button

COPY ALL THE 3 FILES (one by one) FROM xRecovery Folder to </system/bin> folder
(i.e. busybox, chargemon and xrecovery.tar)

Once you have done that... you have installed xRecovery to your Xperia X8

SHUTDOWN -> Wait 5 seconds and REBOOT

When you see the words [Sony Ericsson] on the phone screen - start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.

USING xRecovery

Select Buttons = Volume Up & Volume Down Buttons
Enter Button = Home Button
Back Button = Back Button

To BACKUP your Xpedia X8's current ROM
select <backup and restore><backup> from the menu

This will create a backup file in your SD Card <SD/xRecovery/backup>

Note: Typically the backup should be around 256MB in size, so you may want to copy the file to your PC to lighten your 2GB SD Card.

To RESTORE from a backup of your current ROM
select <backup and restore><restore> from menu & select the <file_name>

Note: If you have a backup on PC just copy it to <SD/xRecovery/backup> and restore as usual.

To install a Custom ROM (e.g. GINGERBREAD 2.3.3 CM7 for Xpedia X8)
Just download it from the xda-developers.com website and copy to SD Card
reboot and use xRecovery to <restore> the Custom ROM to your Xperia X8.

[ROM V19] 2.3.5 GingerXperia ROM for X8

This is a new Gingerbread 2.3 port is based on MiniCM7-2.0.7 by nobodyAtall
This "Gingerbread" Android ROM 2.3.5 is fast and stable.

Features In GingerXperia
3 megapixel camera
Wired headset control (Answer / end calls, play / pause music ...)
WiFi
LED Nodification
Expand ***** 2 ZOMM
No error restart! (SD safe to delete)
Video Recording
FM Radio
Apps2SD native Froyo
Market works well
Camera button (with the previous release)
brightness
Online load
Headphone Jack
Audio Mixer
Video Playback
YouTube, with or without HQ
GSM/3G/HSPA/Data/SMS
sensors
sound
open GL/3D
SD card
vibration
GPS
Bluetooth
USB Storage
Mute button on the call
compass

What's New GingerXperia V19 - 17 Dec 2011
MARKET
WALKMAN
STYLE XPERIA
NEW TWEAKS ALL IN ONE
COMPATIBLE WITH STOCK, LINUXDX, ALFS AND nAa KERNELS
XPERIA STYLE WIDGETS
New Apps and Tweaks from JimdemDroid
XLOUD
BRAVIA HACK

What's New in GingerXperia V18 - 03/12/2011
-BRAVIA HACK FULL
-XLoud and DSP Manager
-New tweaks
-Status Bar transparent
-Arc launcher
-New default Wallaper( Thanks to Sebastias Shevaz)
New stile in lockscreen ring
Android original keyboard and original XPERIA keyboard

-TO FIX SIGNAL, ONLY REBOOT PHONE AND ENOY

And If you want to try the iPhone 4S Launcher <-- download & install this...
Just a quick note about the iPhone 4S Launcher - you will gain iPhone look-a-like
icons and functionality but you will lose your widgets homepages.

ABOUT Autobrightness
Just a quick note about the autobrightness settings in v12+. To make it work propperly you must enable "allow light decrease" in cyanogen mod settings -->Display settings -->Automatic backlight

GIVE IT A TRY?
GingerXperiaV5
GingerXperiaV6B (Bugs Fixed)
GingerXperiaV7
GingerXperiaV8
GingerXperiaV9
GingerXperiaV10
GingerXperiaV11
GingerXperiaV12 - Bug Fixed Release
GingerXperiaV13
GingerXperiaV14
--[Break]-- Developer was banned from XDA Developer's Website
GingerXperiaV17
GingerXperiaV18
GingerXperiaV19


DISCLAIMER: Please use the info below at your own risk with no warranty of any kind.

Here is how you can try Gingerbread 2.3 safely and revert back to your stock Android Eclair 2.1.1 if you don't like the Android Gingerbread 2.3.5 ROM

PREREQUISITES <-- IMPORTANT!!!
1) Make sure you have Rooted and xRecovery installed on your Xperia X8.
2) Make sure you have new baseband xxxxxxx15 - check <settings><About phone>
If you don't have baseband xxxx015 your phone will end up in a boot loop



METHOD:

A) BACKUP STOCK ANDROID ECLAIR 2.1

Step 1: Make a backup copy of your Android Eclair 2.1 using xRecovery
- check that your phone's SD Card has at least 650MB of free space
[SD card free space is to hold both your phone original backup ROM and the 2.3 ROM]
- shutdown your X8 and wait 5 seconds -> <reboot> your phone.
- when you see the words [Sony Ericsson] on the phone screen -> start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- select <backup and restore><backup> from the menu

NOTE:

- This will create a backup file in your SD Card <SD/xRecovery/backup>
- After you have completed the backup using xRecovery, it will return to the menu screen.
- Now choose <reboot> - your X8 phone should restart

B) DOWNLOADING 2.3.3 ROM

Step 2: Download GingerXperia ROM
- <mount> your Xpedia X8 and copy this file <GingerXperiaV8.zip> into SD card
- <unmount> and shutdown your Xpedia X8

C) Custom install THE 2.3.5 ROM

Step 3: Installing the 2.3.5 ROM on your Xpedia X8
- <boot> Xpedia X8
- when you see the words [Sony Ericsson] on the phone screen -> start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- <select><factory reset (full wipe)>
- scroll down and hit <install custom zip>
- select <GingerXperiaV8.zip> from your SD card & hit <yes>
- xRecovery will start to install the 2.3.5 ROM on your phone.
- when it is done, xRecovey will go back to the startup menu
- <click><reboot>

Now you can start using your phone - Isn't Gingerbread 2.3.5 great!!!


DON'T WANT TO USE THE 2.3.5 ROM ANYMORE?
Well it was fun visiting and touring the Gingerbread 2.3.5 ROM, now let's go back to Eclair 2.1.1

D) RESTORING THE Official Android Eclair 2.1.1 ROM

Step 4: Reinstalling your original Eclair 2.1.1 ROM
- <shutdown> wait 5 seconds <reboot> Xpedia X8
- when you see the words [Sony Ericsson] on the phone screen -> start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- <select><factory reset (full wipe)>
- scroll down and hit <backup/restore><restore>
- you should see your original 2.1 backup ROM
- <select> <2011-10-xx.xx.xx.xx.ROM><restore> [it should look something like 2011-05-06.21.01.23]
- xRecovery will start to install the original 2.1.1 ROM [the ROM you've backed up in Step 1] from your phone's SD Card.
- when it is done xRecovey will go back to the startup menu
- <click><reboot>

And you are back to where you have started - Xperia X8 Android Eclair 2.1.1

[UPDATED] TinyUmbrella Updated To 5.00.12: Supports iOS 5 Beta 7 and iOS 5 GM

TinyUmbrella 5.00.12 is now available to download for Mac OS X and Windows. TinyUmbrella 5.00.12 supports iOS 5 beta 7 and the recently released iOS 5 GM.

Follow our step-by-step guides to save your iPhone, iPod Touch, iPad and Apple TV SHSH blobs using TinyUmbrella, and to downgrade using TinyUmbrella:

• How To: Save Your SHSH Blobs With TinyUmbrella and Downgrade Using TinyUmbrella
• How To: Save Your Apple TV’s SHSH Blobs! [Required, if Jailbroken]
• How To: Downgrade Using TinyUmbrella

You can download TinyUmbrella 5.00.12 from the iJailbreak Downloads Section. Additionally you can use one of the download mirrors below:
Mirror 1: TinyUmbrella 5.00.12 Windows Download
Mirror 1: TinyUmbrella 5.00.12 Mac OS X Download
UPDATE #1:
TinyUmbrella 5.00.12a is now available for Windows users.
Mirror 1: TinyUmbrella 5.00.12a Windows Download

How to flashing samsung galaxy i9001 firmware

Disclaimer : * Your warranty is now void. * I am not responsible for bricked devices * Do This at YOUR OWN RISK!!
One Package Installation Method

1. Download any stock rom HERE (e.g : XXKPS, ZSKP6) and extract.

(file format must be .md5 extension)

2. Download Odin443andAriesVE.zip HERE dan extract 

(You will get Multi_Downloader_v4.43_with_smd0425.exe and AriesVE.ops)

3. Start Multi_Downloader_v4.43_with_smd0425.exe aka Odin.

4. Turn off the phone and enter 'Download Mode'. Connect the phone to PC via USB Cable.

For no 5 and next, please refer screenshot above.

5. Wait until the phone driver installed. 

5a) In ODIN, the "bars" below "COM Port Mapping" sentence will be turn to yellow. 

5b) In a 'Message' box, there should be "Added!!" and "Detected!!" sentences.

6. Press "OPS" button dan choose AriesVE.ops (file in step no 2).

7. Tick at "One Package" box. 

8. Press "One Package" button and choose downloaded stock rom (.md5 file).

8a) In a "Message" box, there should appear "Check MD5" and bla bla bla..Wait until "Check MD5...ok" sentence.

9. Press "Start" button. "Flashing" process will take 8-10 minutes.

10. Wait until phone is reboot and show homescreen then unplug phone from pc. Done!!

**-If the flashing doesn't complete. Or you face some other problems, just try another USB port, or computer if possible**